IPOL888 VERTICAL TYPE LARGE INDICATOR POST

Fig No.: IP0L888

FM Approved, UL & ULC Listed.

Material Specifications

No. Name Material
1 Locking Wrench ASTM A536
2 Operating Nut ASTM B62/A351 CF8
3 Bolt ASTM A105
4 Nut ASTM A105
5 Flat Washer ASTM A105
6 Shap Ring AISI 606
7 Taget Carrier Nut ASTM B62
8 Target ASTM B108
9 Bolt ASTM A105
10 Flat Washer ASTM A105
11 Window Gland ASTM A307B
12 Window Glass LEXAN-UN STABILIZE
13 Gasket EPDM
14 Bolt ASTM A105
15 Spring Washer ASTM A105
16 Nut ASTM A105
17 Body ASTM A105
18 Bolt ASTM A105
19 Nut ASTM A105
20 Base Flange ASTM A126B
21 Bolt ASTM A105
22 Nut ASTM A105
23 Crane Coupling ASTM A536
24 Cotter Pin AISI 304
25 Stand Pin ASTM A536
26 Stem 1″ Square AISI 1045
27 Plug AISI 304
28 Top Cover ASTM A126B
29 Screw AISI 304
30 Lock Nose ASTM A307B
31 Reducer PARTS
32 Bolt ASTM A105
33 Nut ASTM A105
34 Wrench Nut ASTM A536
35 Washer AISI 304
36 Hex, Socket Cap
Screw
AISI 304
37 Spring Washer AISI 304

Bury Depth

Valve Size Min. Bury
Depth (inch)
Max. Bury
Depth (inch)
H1 H2
mm inch mm inch
14″ 50.87″ 158.35″ 741 29.17″ 889.5 35.02″
16″ 53.82″ 161.30″ 816 32.13″ 964.5 37.97″
18″ 58.54″ 166.02″ 936 36.85″ 1084 42.68″
20″ 61.89″ 169.37″ 1021 40.20″ 1169 46.02″
24″ 67.87 175.35″ 1173 46.18″ 1344.5 52.93″

FIELD ADJUSTMENT
1. Remove the top section from the top of the Indicator Post assembly.
2. Cut the required length off the bottom of the Stand pipe for the Gound Line to match up with Standpipe Gound Line mark.
3. Set the “OPEN” and” SHUT” targets for the appropriate valve size.
4. Reattach the Top Section to the top of the Indicator Post assembly.
5. Design and dimensions are subject to change without notice.

Related products

Submit An Inquiry

As a direct manufacturer, we have dedicated measurement, installation, and production teams to ensure a perfect fit every time.

Our representatives will contact you shortly to confirm your appointment date and time. Thank you for your interest!