Material Specification
| No. | Qty. | Name | Material |
|---|---|---|---|
| 1 | 1 | Locking Wrench | ASTM A126B |
| 2 | 1 | Operating Nut | ASTM B62 |
| 3 | 2 | Hex Nut Screw | ASTM A105 |
| 4 | 2 | Hex Nut | ASTM A105 |
| 5 | 1 | Snap Ring | AISI 066 |
| 6 | 1 | Taget Carrier Nut | ASTM B62 |
| 7 | 4 | Taget | ASTM B108 |
| 8 | 4 | Hex Cap Nut | ASTM A105 |
| 9 | 2 | Window Glass | LEXAN-UM |
| 10 | 2 | Window Glass Gasket | PTFE |
| 11 | 4 | Hex Cap Screw | ASTM A105 |
| 12 | 4 | Hex Nut | ASTM A105 |
| 13 | 1 | Body | ASTM A536 |
| 14 | 6 | Hex Cap Screw | ASTM A105 |
| 15 | 6 | Hex Nut Screw | ASTM A105 |
| 16 | 1 | Hex Nut | ASTM A126B |
| 17 | 4 | Base Flange | ASTM A105 |
| 18 | 4 | Hex Nut | ASTM A105 |
| 19 | 1 | Crane Coupling | ASTM A536 |
| 20 | 1 | Cotter Pin | AISI 304 |
| 21 | 1 | Stand Pipe | ASTM A53 |
| 22 | 1 | Stem | AISI 1045 |
| 23 | 1 | Plug | AISI 304 |
| 24 | 1 | Cover | ASTM A126B |
| 25 | 1 | Cross Recessed Countersunk Head Screw |
AISI 304 |
| 26 | 1 | Locking Nose | ASTM 307 B |
BURY DEPTH
| Valve Size | Min. Bury Depth (inch) |
Max. Bury Depth (inch) |
H | |
|---|---|---|---|---|
| mm | inch | |||
| 4″ | 31.14″ | 65.39″ | 251 | 9.98″ |
| 6″ | 35.12″ | 69.37″ | 352 | 13.86″ |
| 8″ | 38.58″ | 72.83″ | 440 | 17.32″ |
| 10″ | 42.32″ | 76.57″ | 535 | 21.06″ |
| 12″ | 42.51″ | 79.76″ | 616 | 24.25″ |
FIELD ADJUSTMENT
1. Remove the top section from the top of the Indicator Post assembly.
2. Cut the required length off the bottom of the Standpipe for the Gound Line to match up with Standpipe Gound Line mark.
3. Set the “OPEN” and” SHUT” targets for the appropriate valve size.
4. Reattach the Top Section to the top of the Indicator Post assembly.
5. Design and dimension are subject to change without notice.
